Network Connectivity – H Series Network Portal / Parker Pneumatic – Europe

Category:

With the reduction of I/O cost and ease of centralized machine design, the H Series Network Portal is suitable for use on the H Series Micro and H Series ISO valve series. Preferred connectivity is available with Rockwell CompactLogix and ControlLogix plc’s. This means that the H Series Network Portal’s module part numbers are listed in the Rockwell RSLogix 5000 plc software and simplifies the set-up process. With H Series ISO valves it is possible to control up to 32 Solenoids. H Series Micro bus expansion allows an additional 32 solenoids per expansion, 3 expansions maximum. There is a one meter fixed cable length per expansion. Maximum of 256 inputs and 256 outputs can be directly connected to a communication module. Optional modules that can be mounted between the communication module and the valve driver module are I/O Modules, and power extender modules. Maximum solenoids per manifold are 32 solenoids for ISO HA/HB and H Series Micro, and 24 solenoids for H1, H2, and H3.

Markets:
• Automotive
• General Industrial
• Material Handling

Features/Benefits:
• Used with valve series H Series Micro and H Series ISO
• Available protocols: DeviceNet, EtherNet/IP and PROFIBUS-DP, ControlNet
• I/O options: Digital or analog inputs and outputs, , 32 solenoid control, bus expansion, or preferred connectivity
• Bus expansion: H Series Micro only can be expanded up to 128 solenoid coils
• Max I/O per node: 256 inputs and 256 outputs per node
• Max coils per manifold: Up to 32 solenoids per manifold for ISO HA HB and H Series Micro, and up to 24 solenoids for H1, H2, and H3

Connection Options include: 7/8 mini male for main node or power expansion modules, M12 power for H Micro expansion modules, M12 or mini male for power supply, Profibus bus-in M12 male Type B, Profibus bus-out M12 female Type B, DeviceNet bus-In M12 male Type A and DeviceNet bus-out M12 female Type A

Applications:
• Blow molding machines
• Case Erectors
• Centralized machinery design for general industrial
• End of Arm Tooling (EOAT)
• Riveting
• Vehicle Body Assembly

Accessories:
• 7/8″ mini power cables – 4 & 5 pin, male and female
• Bus extender cables
• Bus power tee
• Devicenet and CANopen cables – 7/8″ and M12 male to female
• DeviceNet and CANopen terminating resistor – 7/8″ & M12 male
• Ethernet cables – M12 female to M12 male, RJ45 to M12 male
• M12 A-code cables – 4 & 5-pin male & female
• M23 cables – 12 & 19 Pin
• M8 cables – 3-Pin male & female
• Power extender module
• Power tee – 4 pin male to 2 female sockets, 5 pin male to 2 female sockets
• Profibus cables – M12 male to M12 female
• Profibus terminating resister – M12 male
• Replacement base module
• Terminating base module